01 / INPUT
SET THE DRIVE.
Input Trim sets the level before the transformer and the dry tap. Turn it up to push more signal into the limiter.
With Limiter Lock engaged, more drive means deeper gain reduction.
INPUT TRIM / −24 TO +12 dB
Get Podium Limiter
20 SERIES / TRANSMISSION & DEGRADATION
MODEL 23
A level-locking limiter with a slow attack, transformer saturation, and a 9 V battery you can run down. Built for explosive drum rooms, crushed vocals and lo-fi analog textures.
macOS / AU + VST3 + AAX
FROM THE LECTERN TO THE STUDIO.
The stick attack gets through. The room comes up behind it.
Inspired by the Shure Level-Loc, a 1960s PA level controller, Podium Limiter holds the level nearly steady once the signal crosses the threshold. Its slow attack lets transients through, and the release sets how quickly the room comes back up between hits.
Start with a drum room mic or a parallel vocal. Drive the transformers, shorten the release, or drain the battery until the sound starts to sputter.
A CLOSER LOOK / 06 STOPS
Follow the signal from input trim to the meter.
01 / INPUT
Input Trim sets the level before the transformer and the dry tap. Turn it up to push more signal into the limiter.
With Limiter Lock engaged, more drive means deeper gain reduction.
INPUT TRIM / −24 TO +12 dB
02 / SIDECHAIN FILTER
The high-pass filter keeps kick and bass from driving the detector. The low-pass filter makes it less sensitive to cymbals and sibilance. Both leave the audio path untouched.
Choose Stereo to hold the image steady, or Dual Mono to let each side of a room pair move independently.
ON / TYPE / LINK / SC FREQ
03 / LIMITER LOCK
Level drives the gain cell. Threshold sets where it clamps, and Release sets how quickly the gain comes back between hits.
Switch the Mic Transformer in for output color, then use Make-up Gain to set the processed level.
LEVEL / THRESHOLD / RELEASE / MIC TRANSFORMER / MAKE-UP GAIN
04 / ANALOG GRIT
Turn Power Sag down from 9 V for softer, dirtier limiting. Drain it far enough and quiet passages begin to drop out.
Turn up Crunch for asymmetric clipping, from lightly shaved peaks to a squared-off sound.
POWER SAG / CRUNCH
05 / OUTPUT
Use the post high-pass and low-pass filters to trim lows and highs from the processed signal, then bring the dry signal back with Mix.
Set the final gain with Output Level. Choose 2× or 4× oversampling to reduce aliasing when you push the nonlinear stages.
POST FILTER / MIX / OUTPUT LEVEL / OVERSAMPLING
06 / METER
Slide the meter selector to IN or OUT to read signal level. Choose GR to see how much gain the limiter is taking off.
The red PEAK light flags signal approaching digital clipping.
INPUT / GAIN REDUCTION / OUTPUT
SESSION NOTES
Find starting points for drum rooms and vocals, plus a full rundown of each control.
Read the owner’s manual (PDF)LAUNCH OFFER
Get the free macOS installer through the download form.